Atlantic Welding Consumables

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
   

For Hardfacing
   
Welding Rods for Hardfacing   堆焊焊条                                    
Item Code Type of Covering Equivalent Norm Welding Position Type of Current Standard & Typical Chemical Composition of Deposited Metal (%) Hardness of Deposited Metal
HRC 		Applications
C Mn Si S P Cr Ni Mo V W Nb Other Elements
CHR107 Low hydrogen
Sodium 		GB EDPMn2-15 F,V,
OH,H 		DC+ ≤0.20
0.089 		≤3.50
2.80 		— — — — — — — — — — HB≥220
300.6 		Surfacing and repair welding of worn parts surface of low carbon, medium carbon and low alloy steel.
CHR112 Lime titania GB EDPCrMo-A1-03 F,V,
OH,H 		AC or DC+ ≤0.25
0.20 		— — — — ≤2.00
1.00 		— ≤1.50
0.52 		— — — ≤2.00 HB≥220 Surfacing and repair welding of worn parts surface of low carbon, medium carbon and low alloy steel.
CHR127 Low hydrogen
Sodium 		GB EDPMn4-15 F,V,
OH,H 		DC+ ≤0.20
0.11 		≤4.50
3.60 		— — — — — — — — — ≤2.00 ≥30
41.1 		Surfacing of worn surface of low and medium carbon steels or low alloy steels.
CHR132 Lime titania GB EDPCrMo-A2-03 F,V,
OH,H 		AC or DC+ ≤0.50
0.29 		— — — — ≤3.00
2.00 		— ≤1.50
0.74 		— — — — ≥30
44.5 		Surfacing and repair welding of worn surface of low and medium carbon steels or low alloy steels.
CHR172 Lime titania GB EDPCrMo-A3-03 F,V,
OH,H 		AC or DC+ ≤0.50
0.34 		— — — — ≤2.50
2.30 		— ≤2.50
1.90 		— — — — ≥40
50.4 		Surfacing of worn parts of gear wheel, mining machinery etc.
CHR207 Low hydrogen
Sodium 		GB EDPCrMnSi-A1-15 F,V,
OH,H 		DC+ 0.30-1.00
0.90 		≤2.50
2.00 		≤1.00
0.67 		≤0.035
0.007 		≤0.035
0.025 		≤3.50
3.00 		— — — — — ≤1.00 ≥50
55.2 		Surfacing of worn parts of bulldozer blade propeller etc.
CHR212 Lime titania GB/ 984 EDPCrMo-A4-03 F,V,
OH,H 		AC or DC+ 0.30-0.60
0.45 		— — — — ≤5.00
4.00 		— ≤4.00
1.30 		— — — — ≥50
57.7 		One layer and multi-layer surfacing of worn parts surface of gear wheel, excavator and mining machinery etc.
CHR237 Low hydrogen
Sodium 		GB/T 984 EDPCrMoV-A1-15 F,V,
OH,H 		DC+ 0.30-0.60
0.50 		— — — — 8.00-10.00
9.40 		— ≤3.00
2.40 		0.50-1.00
0.67 		— — ≤4.00 ≥50
57.2 		Surfacing of silt worn and atmosphere corrosive hydraulic machinery, excavator and parts of mining machinery etc.
CHR256 Low hydrogen
Potassium 		AWS A5.13 EFeMn-A F,V,
OH,H 		AC≥70V
or DC+ 		≤1.10
0.80 		11.00-16.00
13.30 		≤1.30
0.50 		— — — — — — — — ≤5.00 HB≥170
193.8 		Surfacing of easy-impacted, easy-worn parts of crushers, rails, bulldozers etc.
CHR266 Low hydrogen
Potassium 		AWS A5.13 EFeMn-B F,V,
OH,H 		AC or DC+ 0.5-1.0
0.80 		12.00-16.00
13.00 		≤1.30
0.51 		— — — — 0.50-1.50
1.30 		— — — ≤1.00
0.78 		HB≥170
199 		It is suitable for hardfacing abraded parts of crusher machines, excavators, bulldozers, switches of railway and so on. 
CHR276 Low hydrogen
Potassium 		GB/T 984 EDCrMn-B-16 F,HF AC or DC+ ≤0.80
0.65 		11.00-18.00
12.58 		≤1.30
0.72 		— — 13.00-17.00
14.30 		≤2.00
0.052 		≤2.00
1.00 		— — — ≤4.00 HB≥210
212.6 		Surfacing of high manganese steel structures.
CHR307 Low hydrogen
Sodium 		GB/T 984 EDD-D-15 F,V,
OH,H 		DC+ 0.70-1.00
0.90 		— — ≤0.035
0.010 		≤0.040
0.019 		3.80-4.50
4.30 		— — 1.00-1.50
1.20 		17.00-19.50
18.80 		— ≤1.50 ≥55
61.8 		Surfacing of blade of semifinished cutting tool made of medium carbon steel, and repair welding worn cutting tool or other tool.
CHR322 Lime titania GB/T 984 EDRCrMo            WV-A1-03 F,V,
OH,H 		AC or DC+ ≤0.50
0.42 		— — ≤0.035
0.011 		≤0.040
0.026 		≤5.00
4.30 		— ≤2.50
2.00 		≤1.00
0.60 		7.00-10.00
8.60 		— — ≥55
60.3 		Surfacing of blade of model and cutting, and repair welding of mechanical parts requiring high function for wear resistance.
CHR326Ni Low hydrogen
Potassium 		DGS K 501.21-2004 VD,F,
OH 		AC or DC+ ≤0.50
0.36 		— — — — ≤5.50
3.56 		1.30-2.80
1.72 		≤2.50
0.96 		≤1.50
1.40 		6.00-9.00
7.39 		— — ≥45
57.4 		Surfacing and repair welding high wear resistance parts, such as, edges of cutting machines,models.
CHR327 Low hydrogen
Sodium 		GB/T 984 EDRCrMo            WV-A1-15 F,V,
OH,H 		DC+ ≤0.50
0.41 		— — ≤0.035
0.013 		≤0.040
0.025 		≤5.00
3.90 		— ≤2.50
1.98 		≤1.00
0.60 		7.00-10.00
8.70 		— — ≥55 Surfacing of blade of model and cutting, and repair welding of mechanical parts requiring high function for wear resistance.
CHR337 Low hydrogen
Sodium 		GB/T 984 EDRCrW-15 F,V,
OH,H 		DC+ 0.25-0.55
0.43 		— — ≤0.035
0.008 		≤0.040
0.019 		2.00-3.50
2.90 		— — — 7.00-10.00
9.40 		— ≤1.00 ≥48
59.3 		Surfacing of forging model for cast steel and forge steel. Also repair welding of forging model.
CHR397 Low hydrogen
Sodium 		GB/T 984 EDRCrMnMo-15 F,V,
OH,H 		DC+ ≤0.60
0.46 		≤2.50
1.00 		≤1.00
0.62 		≤0.035
0.006 		≤0.040
0.019 		≤2.00
1.20 		— ≤1.00
0.64 		— — — — ≥40
55.2 		Surfacing of cast steels and heat forging model. Also repair welding of worn forging model.
CHR502 Lime titania GB/T 984 EDCr-A1-03 F,V,
OH,H 		AC or DC+ ≤0.15
0.13 		— — ≤0.03
0.007 		≤0.04
0.024 		10.00-16.00
11.30 		— — — — — — ≥40
55.5 		It is widely for hardfacing carbon steel and low alloy steel axis, shafts and valves that working temperature is below 450℃.
CHR507 Low hydrogen
Sodium 		JIS Z3251 DF-4A
GB/T 984 EDCr-A1-15 		F,V,
OH,H 		DC+ ≤0.15
0.13 		— — ≤0.030
0.008 		≤0.040
0.020 		10.00-16.00
13.20 		— — — — — ≤2.50 ≥40
43.1 		Surfacing of axles and valves made of carbon steel and alloy steel, working temperature of which is below 450 ℃.
CHR507Mo Low hydrogen
Sodium 		GB/T 984 EDCr-A2-15 F,V,
OH,H 		DC+ ≤0.20
0.12 		— — — — 10.00-16.00
12.30 		≤6.00
1.50 		≤2.50
1.60 		— ≤2.00
1.20 		— ≤2.50 ≥37
42.3 		Surfacing of valves, which work temperature should be below 510 ℃.
CHR507MoNb Low hydrogen
Sodium 		DGS K 501.31-2004 F,V,
OH,H 		DC+ ≤0.15
0.13 		— — ≤0.030
0.005 		≤0.040
0.019 		10.00-16.00
12.60 		— ≤2.50
0.85 		— — ≤0.50
0.30 		≤2.50 ≥37
45.8 		Surfacing of sealing surface for middle and low pressure valves working temperatures of which is below 450 ℃.
CHR517 Low hydrogen
Sodium 		GB/T 984 EDCr-B-15 F,V,
OH,H 		DC+ ≤0.25
0.18 		— — — — 10.00-16.00
13.00 		— — — —   ≤5.00 ≥45
51.0 		Surfacing of axles made of carbon steel and low alloy steel valves, working temperatures of which is below 450 ℃.
CHR547Mo Low hydrogen
Sodium 		GB/T 984 EDCrNi-B-15 F DC+ ≤0.18
0.14 		0.60-5.00
1.40 		3.80-6.50
4.25 		≤0.030
0.006 		≤0.040
0.020 		14.00-21.00
17.28 		6.50-12.00
10.30 		3.50-7.00
4.98 		— — 0.50-1.20
0.85 		≤2.50 ≥37
47.0 		Surfacing and sealing surface for high pressure valves working temperature of which is below 600 ℃.
CHR547MoA Low hydrogen
Sodium 		DGS K 501.41-2004 F DC+ ≤0.18
0.13 		1.00-2.50
1.31 		2.00-3.20
2.60 		≤0.030
0.010 		≤0.040
0.027 		14.00-20.00
16.00 		8.00-12.50
9.63 		3.50-7.00
6.10 		≤1.50
0.68 		≤2.80
2.00 		0.50-1.20
0.73 		— ≥37
45.4 		Surfacing and sealing surface for high pressure valves working temperature of which is below 600 ℃.
CHR577 Low hydrogen
Sodium 		JIS Z3251 DF-ME
GB/T 984 EDCrMn-C-15 		F DC+ ≤1.10
1.00 		12.00-18.00
13.70 		≤2.00
1.24 		— — 12.00-18.00
14.30 		≤6.00
0.13 		≤4.00
3.30 		— — — ≤3.00 ≥28
32.2 		Surfacing and sealing surface for middle temperature high pressure valves working temperature of which is below 510 ℃.
CHR608 Graphite GB/T 984 ED Z-A1-08 F,V,
OH,H 		AC or DC+ 2.50-4.50
2.80 		— — — — 3.00-5.00
4.80 		— 3.00-5.00
4.20 		— — — — ≥55
59.2 		Surfacing parts of agricaltural machinery and mining equipments worn and inpacled by grits.
CHR618 Graphite DGS K 501.51-2004 F,V,
OH,H 		AC or DC+ ≤4.00 1.00-2.50 — ≤0.030 ≤0.050 15.00-25.00 — 3.00-6.50 — — — ≤6.00 ≥48 Surfacing parts worn by grit, air, water at normal and middle temperature.
CHR646 Low hydrogen
Potassium 		GB/T 984 ED ZCr-B-16 F AC or DC+ 1.50-3.50
2.20 		≤1.00
0.12 		— — — 22.00-32.00
29.00 		— — — — — ≤7.00 ≥45
51.2 		Surfacing structures of high temperature and high temperature wear resistance corrosion resistance. Such as hydraulic turbine vanes, parts of high pressure pump, etc.
CHR648 Graphite GB/T 984 ED ZCr-B-08 F AC or DC+ 1.50-3.50
2.20 		≤1.00
0.15 		— — — 22.00-32.00
28.00 		— — — — — ≤7.00 ≥45
53.0 		Surfacing structures of high temperature and high temperature wear resistance corrosion resistance. Such as hydraulic turbine vanes, parts of high pressure pump, etc.
CHR678 Graphite GB/T 984 ED Z-B1-08 F AC or DC+ 1.50-3.50
1.60 		— — — — — — — — 8.00-10.00
8.60 		— ≤1.00 ≥50
54.0 		Surfacing of parts for mining machinery and crusher machinery.
CHR698 Graphite GB/ 984 ED Z-B2-08 F AC or DC+ ≤3.00
1.70 		— — — — 4.00-6.00
5.13 		— — — 8.50-14.00
11.24 		— ≤3.00 ≥60
63.0 		Surfacing of mining machinery and mud pump.
CHR707 Low hydrogen
Sodium 		GB/T 984 ED W-A-15 F DC+ 1.50-3.00
2.70 		≤2.00
1.33 		≤4.0
0.51 		— — — — — — 40.00-50.00
43.00 		— Fe
Rem. 		≥60
64.6 		Surfacing of rock strong wear resisting parts, such as concrete mixer vanes, bulldozer and vanes, excavater vanes.

 

 
Copyright©2012 Eram Eilia GmbH Welding Consumables. All rights reserved. Res 1024x768
by RohanWeb.com. Last modified: 5 Feb, 2012