|
CHW-50C3
Solid Wire for MAG/MIG Welding |
AWS 5.18
ER70S-3
CSA ER49S-3
EN 440 G4Si1
JIS YGW16
GB/T ER50-3
|
| |
|
|
Description:
CHW-50C3 is a coppered
solid wire for welding with Ar+CO2 gas mixtures. It shows a very good
welding performance especially in the range of lower current in case spark
is much lower than CHW-50C6SM (ER70S-6). Molten steel flows smoothly and
weld seam has a high crack-resistance. It is suitable for butt or fillet
structures made of mild steel and 500Mpa high tensile steel, in particular
for high speed welding sheet-steel.
|
|
| Chemical
Composition of Wire (%) |
|
C |
Mn |
Si |
S |
P |
Standard |
0.06-0.15 |
0.90-1.40 |
0.45-0.75 |
≤0.035 |
≤0.025 |
Typical |
0.074 |
1.01 |
0.62 |
0.011 |
0.015 |
|
Ni |
Cr |
Mo |
V |
Cu |
Standard |
≤0.15 |
≤0.15 |
≤0.15 |
≤0.03 |
≤0.50 |
Typical |
0.021 |
0.020 |
0.007 |
0.010 |
0.11 |
|
| Mechanical Properties of Deposited Metal |
|
Yield Point
ReL (MPa) |
Tensile Strength
Rm (MPa) |
Elongation
A (%) |
Impact Value (J) -20℃ |
Shield Gas |
Standard |
≥400 |
≥480 |
≥22 |
≥27 |
20%CO2+80%Ar |
Typical |
435 |
540 |
29 |
120 |
|
| Recommended Current Range
(DC+) |
Diameter（mm） |
0.8 |
0.9 |
1.0 |
1.2 |
1.6 |
Current Range（A） |
60-150 |
60-200 |
70-230 |
100-350 |
120-450 |
|
Approvals |
CWB |
TUV |
Grade |
ER49S-3 |
EN440-G38 4 M G2Si1 |
|
